PS775 Color Monitor
User’s Guide
Guide de l’utilisateur
Bedienungsanleitung
(Latin American Spanish)
(Italian)
(Brazilian Portuguese)
(Swedish)
With Plug and Play
(Russian)
Full 17" (16.0" Diagonal Viewable)
(Polish)
(Arabic)
Power Cord Safety Guidelines (continued)
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN
THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS
INSERTED INTO AN APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:
Green-and-Yellow:
Blue:
Brown:
Earth
Neutral
Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in
the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or
GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked with the letter L or coloured RED.
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to
the country of destination and must be used to prevent electric shock. Use the following
guidelines if it is necessary to replace the original cord set, or if the cord set is not
enclosed.
The female receptacle of the cord set must meet CEE-22 requirements and will look like
Figure 1 below:
Figure 1
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure 2), UL
Listed, and CSA Labelled. For units which are mounted on a desk or table, type SVT or
SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets
may be used. The cord set must be selected according to the current rating for your unit.
Please consult Table A below for the selection criteria for power cords used in the United
States and Canada.
Figure 2
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your
country. The cord set is HAR-Certified, and a special mark that will appear on the outer
sheath, or on the insulation of one of the inner conductors.
If you have any questions concerning which proper power cord to use, please consult
with the dealer from whom you have purchased your monitor.
Table A
Cord Type
SJT
Size of Conductors In Cord
Maximum Current Rating of Unit
18AWG
16AWG
14AWG
10Amps
12Amps
12Amps
SVT
18AWG
17AWG
10Amps
12Amps
2
ViewSonic PS775
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio does ec li-3Tj l3o4
terl3o4
h c.7501 5.2 39
3
ViewSonic PS775
CONTENTS
ForYour Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power Cord Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quick Installation* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operation
Front Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OnView® Main Menu, Part 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OnViewMain Menu, Part 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Other Information
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . back cover
*To meet your future needs, and to receive any additional product information as it becomes available,
4
ViewSonic PS775
Getting Started
Congratulations on your purchase of a Professional Series ViewSonic PS775
monitor!
Save the original box and all packing material for future shipping needs.
NOTE: This product was designed for operation in the magnetic fields of the
hemisphere where it was purchased. Also, the word "Windows®" in this user
guide refers to the following Microsoft® operating systems: Windows '95,
Windows '98, Windows NT® (5.0).
Package Contents
Your ViewSonic PS775 package includes the following:
• ViewSonic PS775 monitor
• Attached video cable with 15 pin high density mini D-sub connector
• Power cord
• User’s Guide
• INF and ICM installation files on CD-ROM or diskette
IMPORTANT: The supplied INF file assures compatibility with Windows operating
systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors.
ViewSonic® recommends that you install both files.
• For CD-ROM: Insert the CD-ROM into your system, wait for it to auto-start, select
“Monitor Drivers,” and follow the on-screen instructions.
• For diskette: Insert the diskette into your system, run install.exe, and follow the on-
screen instructions.
Precautions
•
•
For best viewing conditions sit at
least 18" from the monitor.
Choose a well ventilated area to
position your monitor. Do not place
anything on the monitor that prevents
adequate dissipation of heat.
•
AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS. Oils from
the skin are difficult to remove.
•
•
Ensure the area around the monitor is
clean and free of moisture.
•
•
NEVER REMOVE THE REAR
COVER. The monitor contains high-
voltage parts. You may suffer
serious injury if you touch these
parts.
Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
•
•
Do not place heavy objects on the
monitor, video cable, or power cord.
Avoid exposing the monitor to direct
sunlight or another heat source. The
monitor should be facing away from
direct sunlight to reduce glare.
If smoke, abnormal noise, or strange
odor is present, immediately switch
the monitor off and call your dealer or
ViewSonic. It is dangerous to continue
using the monitor.
• Always handle your monitor with
care when moving it.
5
ViewSonic PS775
Getting Started
them
to
install
the
PS751’
s
INF
file.4 Install INF and ICM files•
NOTE: At this point Windows®
98users may84 ceive
a
message asking
is
very
important.
follow the on-screen instructions.•
sequence
(monitor
before
computer)
grounded AC outlet, then to thw
e
erP-OoSN751.3
P
monitor
THEN
er-wOoNcomputerP
the
PS751
monitor,
THENpower-
ON
t
he
com puter.
PS751's
serial
.2 Con
n
n
u
e
m
c
b
t
eprower cordConnect
the
p
ower
cord
to
a
properly
ViewSonic®
(see
the
back
cover
of
thisguide).
ou
Y
will
n
e
ed
to
pr ovide
your
computer.
To
order
an
adapter,
contact
to
the
video
cable,
then
to
the
Macintosh
adapter
(part
No.
VMAC-1
)
ComputerAC INQuick
InstallationGetting
Started1 Connect video cableMake
sure
b
o
th
the
PSd
7
c5o
n
1m
8
p
auter
a
re
powere
d
OFF.
Co nnectthe
vi deo
cable
to
the
compu ter.Macintosh®
users:
Connect
a
Back
of
graphics
card.6
Use the OnView®
controls toadjust the screen image.See Operation,
pages
7-10.
user
guide
for
your
computer's
resolution
and84
fresh
rate,
see
the
Socket
Refresh
Rate)
Example:
1
024
x7
688@75HzFor
instructio
ns
on
changing
t
he
Timing Mode
(
Resolution and
•
Write the serial number (see bafcko
the monitor) in "For yourRecords" on page
1
of this guide.•
Register the warranty of yourmonitor
n
o
the
Internet
at:http://www.viewsonic.com
customer
service
needs:
star
sel,ectt“
Monitor
Dr
ivers,”
and
PS751
Monitor!To
be
best
prepared
for
any
future
Enjoy
your
new
your
system,
run
install.exe, an
d
fo
|